Sedia 1 Chair

Enzo Mari

Sedia 1 autoprogettazione DIY Chair by Enzo Mari
Sedia 1 Chair

Designed by Enzo Mari
Published in Fall 2019

Originally published in Enzo Mari’s Autoprogettazione, alongside a full collection of easy to assemble furniture, the Sedia 1 Chair has emerged as the most recognized piece from the collection. It requires the simple manual processes of sawing lengths of softwood and hammering the pieces together with nails. The full assembly process takes up to 2 hours to complete. Each chair costs under 25 USD on average to produce.

Sedia 1 autoprogettazione DIY Chair by Enzo Mari
Sedia 1 autoprogettazione DIY Chair by Enzo Mari
Assembly
Index
Parts
Smooth Planed Pine Wood, 1in x 8in (20.5mm x 194mm)
*Any popular softwood can also be used, like Redwood. Metric measurements above are actual, not nominal, and availability may vary by location. 18mm x 194mm wood can also be used though it is not preferred.
 
Quantity required: 2 pieces 20.5in (52cm) long, 3 pieces 19.5in (50cm) long, 2 pieces 18.5in (47cm) long
Smooth Planed Pine Wood, 1in x 2in (20.5mm x 44mm)
*Any popular softwood can also be used, like Redwood. Metric measurements above are actual, not nominal, and availability may vary by location. 18mm x 44mm wood can also be used though it is not preferred.
 
Quantity required: 2 pieces 24in (61cm) long, 4 pieces 17.5in (44cm) long
Nails, 1-1/2in (40mm) Length
 
Quantity required: 48
Tools
Hand Saw
Ruler or Tape Measure
Square (or flat object with 90 degree angle)
Hammer
Sandpaper, 180 Grit
Help Each Other